Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 648 / 1193

Network Address Translation
Left running head:
Chapter name (automatic)
622
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
C
ONFIGURE
SNAT
WITH
H
OST
IP A
DDRESS
Note: Currently, ‘Hostname’ option is not supported. Only host IP address can be
configured.
E
XAMPLE
ALU(config-nat-N1)# match m1 source-nat host 192.168.10.91
T
O
C
ONFIGURE
SNAT
WITH AN
IP A
DDRESS
P
OOL
Note: If a SNAT policy with the pool configuration is attached to an interface, and at any
given point of time, the list is modified, you need to reapply the NAT policy on the
interface.
E
XAMPLE
ALU(config-nat-N1)# match m1 source-nat pool l1
Command (in NCM) Description
[ <1-65535> ] match [{ all | any }]
< match-list name> source-nat host
{ <ip-address|host-name> } [ port-
range {< 2048-65535 > < 2048-
65535 >}| static ]
This command is used to configure a
SNAT with host IP address.
Note: If no address is
configured, the IP
address of the egress
interface on which the
NAT policy is applied will
be used.
Command (in NCM) Description
[ <1-65535> ] match [{ all | any }]
< match-list name> source-nat
pool <list-name> [ port-range
{< 2048-65535 > < 2048-65535 >}
| static ]
This command is used to configure
SNAT with an IP address pool.
Note: If no address is
configured, the IP address
of the egress interface on
which the NAT policy is
applied will be used.