Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 477 / 1193

Protocol Independent Features
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
451
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
C
ONFIGURE
R
OUTE
-
MAP
M
ATCH
P
ARAMETERS
One or more match commands follow a route-map configuration. If there are no
match commands, then match result is permit. Configure at least one match
command.
E
XAMPLE
ALU(config-route-map)# match as-path 1
ALU(config-route-map)# match community 1
ALU(config-route-map)# match ip address prefix-list testprefix
ALU(config-route-map)# match ip next-hop 1
ALU(config-route-map)# match ip route-source 5
ALU(config-route-map)# match metric 10
ALU(config-route-map)# match interface GigabitEthernet 7/0
ALU(config-route-map)# match route-type external type-2
Command (in Route-map CM) Description
match as-path <1-199>
Matches a BGP autonomous system
path access list.
match community [< 1-99 >] [< 100-
199 >] [ exact-match ]
Matches a BGP community-list.
match ip address { <1-99 >| <1300-
2699 >| <access-list name>|prefix-
list <prefix-list name> }
Matches a destination network
number address that is permitted by
a standard access list, an extended
access list, or a prefix list, or perform
policy routing on packets.
match ip next-hop { <1-99 >| <1300-
2699 >| <access-list name>|prefix-
list <prefix-list name> }
Matches a next-hop router address
passed by one of the access-lists/
prefix-lists.
match ip route-source { <1-
99 >| <1300-2699 >| <access-list
name>|prefix-list <prefix-list
name> }
Matches the address specified by
the specified advertised access lists/
prefix-lists.
match metric < 0-4294967295 >
Matches the specified metric.
match interface < interface-name >
Matches the specified next hop route
out of one of the interfaces specified.
match route-type { external
[{ type-1 | type-
2 }]| internal | local | nssa-external }
Matches the specified route type.