Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 671 / 1193

Modifying NAT Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
645
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
D
ETACH A
NAT P
OLICY FROM AN
I
NTERFACE
E
XAMPLE
In the following example, NAT ‘N1’ is detached from its interface GigabitEthernet7/
0.
Ex 1:
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# no ip nat in nat1
Ex 2:
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# no ip nat out nat1
T
O
T
URN
O
FF
S
TATISTICS ON AN
I
NTERFACE
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# no ip nat statistics out
T
O
D
ELETE A
NAT R
ULE
E
XAMPLE
In the example below, the component or action corresponding to the rule 30 is
deleted.
ALU(config-nat-N1)# no rule 30
Command (in ICM) Description
no ip nat { in | out } <nat-name>
This command detaches a NAT policy
attached to an interface.
This command does not delete the NAT
policy definition in its entirety. It only
detaches it from its interface.
If the command " no ip nat < policy
name> " is issued at the top level and if
this NAT policy is not bound to any
interface, it deletes the NAT policy
definition.
Command (in ICM) Description
no ip nat statistics
{ in | out | both }
This command turns off the statistics for
a given interface.
Command (in NCM) Description
no rule <1-65535>
This deletes only the rule in the NAT
policy corresponding to the line number.