IPsec Tunnel Interface Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
813
Alcatel-Lucent
Beta
Beta
CLI Configuration Guide
T
O
C
ONFIGURE
D
ESTINATION
IP A
DDRESS
FOR
THE
T
UNNEL
E
XAMPLE
ALU(config-if Tunnel1)# tunnel destination 2.2.2.3
ALU(config-if Tunnel1)# no tunnel destination 2.2.2.3
T
O
A
TTACH
AN
IP
SEC
P
ROFILE
TO
THE
T
UNNEL
I
NTERFACE
IPsec Profile needs to be applied to the IPsec tunnel interface through which the
IPsec traffic flows.
Binding an IPsec profile to an interface instructs the system to evaluate all the
interface traffic against the IPsec profile, and to use the specified policy during
connection or security association negotiation.
E
XAMPLE
ALU(config-if Tunnel1)# ipsec-profile PF1
ALU(config-if Tunnel1)# no ipsec-profile PF1
Command (in ICM)
Description
tunnel
destination
<
ip-
address>
This command sets the destination IP
address of the tunnel at the remote end.
no tunnel
destination
<
ip-
address>
The “no” command removes the
configured destination IP address.
Command (in ICM)
Description
ipsec-profile
<
profile-
name>
Enter this command in the Tunnel Interface
Configuration Mode.
This command is used to attach the
configured IPsec profile to the tunnel
interface.
no ipsec-profile
<
profile-
name>
This command is used to detach the IPsec
profile attached to the interface.
Note:
You cannot delete an IPsec
profile that is applied to the
interface. To delete, first detach
the IPsec profile from the tunnel
interface.
Summary of Contents for OmniAccess 700
