Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 507 / 1193

RIP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
481
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
RIP A
UTHENTICATION
Note: RIP Version 1 does not support authentication.
If you are sending and receiving RIP Version 2 packets, RIP authentication on an
interface can be enabled. The key chain determines the set of keys that can be
used on an interface. If a key chain is not configured, no authentication is
performed on that interface, not even the default authentication.
We support two modes of authentication on an interface for which RIP
authentication is enabled:
Plain Text Authentication and MD5 Authentication .
The default authentication in every RIP Version 2 packet is Plain Text
Authentication.
The OA-700 implementation of RIPv2 message authentication includes the choice
of simple password or MD5 authentication and the option of defining multiple
keys, or passwords, on a "key chain".
T
O
C
ONFIGURE
K
EY
C
HAIN
E
XAMPLE
ALU(config)# key-chain allen
ALU(config-keychain allen)#
T
O
C
ONFIGURE A
K
EY
E
XAMPLE
ALU(config-keychain allen)# key 100
ALU(config-keychain-key 100)#
Command (in CM) Description
key-chain <key-chain name>
This command is used to configure a key
chain.
Command (in Key-chain Mode) Description
key <0-2147483647>
This command is used to configure a key
that can be used on an interface in the
range 0-2147483647.