Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 127 / 1193

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
101
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
I
NSTALL A
P
ACKAGE ON THE
S
YSTEM
Note: If the package is installed from a remote location, it is temporarily downloaded into the
user area, and deleted after the installation. So care must be taken to have enough
space for the package before proceeding with the installation.
E
XAMPLE
The following command installs a package after downloading it from remote site
using ftp:
ALU(config)# package install ftp:
Remote Host : 10.91.0.87
Remote Port [ Enter for default ] :
Path/Filename : /packages/alu-apps.2.1.22.1.npm
Username [Enter for none] : user1
Password :
Downloading remote file. This could take a while...
Verifying package... NPM v1.0 format
OK.
Checking the package type ... Release: 2.1.22.1
Are you sure you want to install alu-apps.2.1.22.1.npm? (y/[n])
: y
Installing new release alu-apps.2.1.22.1.npm...OK.
Complete.
Deleting temporary file...OK.
Do you want to set-default immediately?
Yes: Chassis will be rebooted automatically
No : Manually run set-default at a later time
Proceed? (y/[n]) : y
Do you want to save config before proceeding ([y]/n) : y
Building configuration...
[OK]
Setting Default image to 2.1.22.1...
Command (in SUM/CM) Description
package install
{ fpkey: | ftp: | http: | https:
| tftp: | user: | vrf <vrf-
name> }
Installs a release or a component package
from the given location. The package file can
be obtained from user area or fpkey: or it can
be obtained from a remote site using FTP,
TFTP, HTTP, HTTPS, or through an inteface
associated with the specified VRF.
package install flash
{ fpkey: | ftp: | http: | https:
| tftp: | user: | vrf <vrf-
name> }
Installs a LoL flash image on all the cards. The
package file can be obtained from user area or
it can be obtained from a remote site using
FTP, TFTP, HTTP, HTTPS, or through an
inteface associated with the specified VRF.