Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 142 / 1193

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
116
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
H
OT
K
EY
S
UPPORT
OA-700 suppprts Hot Key functionality. Hot Keys (special keys/combination of
keys through which the user can get to the CLI prompt or reboot the chassis) are
mainly for debugging/troubleshooting a running system.
Note: Hot Key functionality works only when connected through Console.
Following are some scenarios where you can use the Hot Key support:
•
System is still up and running as its responding to user input.
•
OA-700 being multi-processor platform, the problem could be in any other card/
process, but CLI is locked due to some inter-dependency.
•
Due to WAN/LAN interfaces being non-operational, the only access to OA-700 is
through console/modem, through which user can still access OA-700 and
diagnose the problem.
•
The system is placed in a remote location and hence physical access is difficult.
CLI user prompt is needed even to re-load OA-700, which remains elusive.
The "Hot Key" functionality on OA-700 is activated when a BREAK is sent,
followed by the command key within 5 seconds of sending the break as given in
the following table:
Action Key Combination
Chassis Reboot BREAK + ‘b’
CLI restart BREAK + ‘c’