DHCP Relay Test Scenarios using OA-780
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1007
Alcatel-Lucent
Beta
Beta
CLI Configuration Guide
DHCP R
ELAY
T
EST
S
CENARIOS
USING
OA-780
Figure 62: DHCP Relay Test Scenario using OA-780
C
ONFIGURATION
S
TEPS
Step 1:
Configure the DHCP server to which the DHCP requests
are to be
forwarded.
ALU(config-if GigabitEthernet7/0)# ip dhcp relay
192.168.1.1
OR
Configure the interface through which the DHCP relay requests have to be
rebroadcasted.
ALU(config-if GigabitEthernet7/0)# ip dhcp relay
interface GigabitEthernet 7/1
When the host 2 sends broadcast requests, the DHCP Relay listens to them and
forwards to the DHCP server. The DHCP client receives the server's response
and passes the response back to the client.
Note:
If you configure relay via IP address and interface, preferred method of relaying
DHCP would be via "relay to address" as it reduces broadcast load.
Summary of Contents for OmniAccess 700
