Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 927 / 1193

Telephony Service Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
901
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
C
ONFIGURE
ROR D
ISPLAY
M
ESSAGE
I
NTERVAL
ROR also generates ROR mode message to all the registered IP phone users
when the call servers are down.
E
XAMPLE
ALU(telephony-service)# ror-display-message interval 100
T
O
C
ONFIGURE
O
UTBOUND
P
ROXY
E
XAMPLE
ALU(telephony-service)# outbound proxy address 1.1.1.2
ALU(telephony-service)# no outbound proxy address 1.1.1.2
Note: It is preferable to configure the IP address of the outbound proxy server on both the
phone and OA-700.
Also, the IP address of the outbound proxy server should not be the same as any of
the ROR call servers.
Command (in Telephony Service
Mode)
Description
ror-display-message interval
<30-3600>
This command is used to configure the
interval (in seconds) at which the display
messages is to be transmitted to the
phones from the ROR module.
The default ror-display-message
interval is 60 seconds.
Command (in Telephony Service
Mode)
Description
outbound proxy address <ip-
address> [ vrf <vrf-name> ]
This command is used to configure the
IP address of the outbound proxy.
Note: VRF parameter in this
command is not supported in
this release.
no outbound proxy address <ip-
address> [ vrf <vrf-name> ]
This command removes the IP address
of the outbound proxy.