Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 702 / 1193

Filter and Firewall
Left running head:
Chapter name (automatic)
676
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
Step 8: Administratively bring up the interface
ALU(config-if < interface-name >)# no shutdown
Example:
ALU(config-if GigabitEthernet7/0)# no shutdown
Step 9: Configure IP address for the interface
ALU(config-if < interface-name >)# ip address { <ip-
address subnet-mask>|<ip-address/prefix-length> }
Example:
ALU(config-if GigabitEthernet7/0)# ip address
20.20.20.20/24
Step 10: Attach the configured firewall policies to appropriate interfaces as per
the desired direction i.e, either “IN/OUT”. See “To Attach a Firewall Policy to an
Interface”
Step 11: View the firewall configuration. See “Firewall Show Commands”
Step 12: Delete the firewall configuration. See “Firewall Deletion Commands”