manualshive.com logo in svg

Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Share
Download
Alcatel-Lucent OmniAccess 700 Cli Configuration Manual Download Page 978

Quality of Service

Left running head: 
Chapter name (automatic)

952

Beta

Beta

CLI Configuration Guide

Alcatel-Lucent

T

O

 C

ONFIGURE

 B

ANDWIDTH

 

FOR

 

THE

 T

UNNEL

 I

NTERFACE

E

XAMPLE

ALU(config-qos-P1)# tunnel Tunnel 1 bandwidth percent 10

ALU(config-qos-P1)# no tunnel Tunnel 1 bandwidth

T

O

 E

NABLE

/D

ISABLE

 Q

O

S P

RE

-C

LASSIFY

QoS Pre-Classify is a feature that allows packets to be classified before tunneling 
and encryption occur. Since the entire original packets are encrypted including all 
headers, post encryption, QoS cannot classify based on the specified match-list.

QoS Pre-Classify classifies packets before encryption and stores the classification 
information for further use in QoS. If any tunnel class is created, then it will use the 
classification information to classify the encrypted packets. 

Note:

QoS Pre-Classify is applicable on the tunnel interface only. 

E

XAMPLE

ALU(config)# interface tunnel 1

ALU(config-tunnel1)# qos-preclassify

ALU(config-tunnel1)# no qos-preclassify

Command (in Policy-map Mode)

Description

tunnel Tunnel <0-14487> 

bandwidth 

{

<101-700000000>

|

 

percent <1-100>

}

This command is used to configure 
bandwidth for the tunnel interface.

101-700000000 - the absolute 
bandwidth (bps) value. 

1-100 - bandwidth in percentage.

no tunnel Tunnel <0-14487> 

bandwidth

This command removes the bandwidth 
configured for the tunnel interface.

Command (in ICM)

Description

qos-preclassify

This command is entered in the Tunnel 
Interface Mode.

This command is used to enable pre-
classification on the tunnel interface.

no qos-preclassify

This command disables the pre-
classification.

Summary of Contents for OmniAccess 700










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands