Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 482 / 1193

Protocol Independent Features
Left running head:
Chapter name (automatic)
456
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
C
ONTROL
A
DVERTISING OF
R
OUTES IN
R
OUTING
U
PDATES
To prevent other routers from learning one or more routes, you can suppress
routes from being advertised in routing updates. Suppressing routes in route
updates prevents other routers from learning the interpretation of a particular
device of one or more routes.
To suppress routes from being advertised in routing updates, enter the following
command:
Note: The OA-700 does not support Distribute-list feature in OSPF.
E
XAMPLE
ALU(config-router bgp AS1)#distribute-list 1 in GigabitEthernet
7/0
ALU(config-router rip)# distribute-list prefix prefix-example
in GigabitEthernet 7/0
Command (in RCM) Description
distribute-list { <1-199> | <1300-2699>
| <access-list-name> | prefix <prefix-
list> } { in | out } { interface-name }
Permits or denies routes from
being advertised in routing
updates depending upon the
action listed in the access list.
distribute-list {< 1-199>| <1300-
2699>|gateway <ip-prefix-list name>
|prefix <ip-prefix-list name> } { in |
out } [[ GigabitEthernet | Serial }
< slot/port >| Loopback <0-14487> ]
This command suppresses
networks from being advertised
in routing updates.
The distribute-list in command is
used to filter networks in
received routing updates.