Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 30 / 1193

CLI Configuration Guide
Left running head:
Chapter name (automatic)
4
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
P
ART
IV - P
ACKET
C
LASSIFICATION
This part consists of Chapter 20 “Common Classifiers” that focuses on
configuring the Common Classifier commands. These commands are generic
across all applications. You are required to have a thorough knowledge of this
chapter before you proceed to configure the NATs, Filters, etc. This chapter
provides a concise overview on the concepts of creating rules, match-lists, lists,
etc.
P
ART
V - R
OUTING
P
ROTOCOLS
The aim of the fourth part is to get the most out of addressing and routing. The
routing function moves data through the network efficiently and finds new paths
when network changes occur. Routing also affects how large the network can
grow - that is, the complexity of the topology and the stability of the network as it
expands.
All the chapters in this part focus on configuring the routing services.
Chapter 21 “Protocol Independent Features” provides commands that are
generic across all routing protocols. You are required to have a thorough
knowledge of this chapter before you proceed to configure the routing protocols.
Chapter 22 “Routing Information Protocol” and Chapter 23 “Border Gateway
Protocol” and Chapter 24 “Open Shortest Path First” provides configuration
commands for configuring RIP, BGP and OSPF routing protocols.
Chapter 25 “Multicast Routing” provides Multicast routing configuration on the
OA-700.
Chapter 26 “Policy Based Routing” covers the Policy Based Routing (PBR)
configuration on the OA-700.
Chapter 27 “Virtual Routing and Forwarding” covers the Virtual Routing and
Forwarding Customer Edge (VRF-CE) configuration on the OmniAccess-700.
VRF-CE is a feature that enables a service provider to support two or more VPNs,
where IP addresses can be overlapped among the VPNs.