Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 886 / 1193

Transparent Firewall
Left running head:
Chapter name (automatic)
860
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
C
ONFIGURE A
TF P
OLICY
E
XAMPLE
ALU(config)# transparent-forward TF1
ALU(config-transparent-forward-TF1)#
ALU(config)# no transparent-forward TF1
T
O
C
ONFIGURE
P
ASS
T
HROUGH
P
ROTOCOL
E
XAMPLE
ALU(config-transparent-forward-TF1)# pass-through protocol
nonip
ALU(config-transparent-forward-TF1)# no pass-through protocol
nonip
Command (in CM) Description
transparent-forward <name>
This command is used to configure a TF
policy.
no transparent-forward <name>
[ force ]
This command is used to delete a TF
policy. If the policy is attached to any of
the interfaces, it cannot be deleted.
The " force " keyword will automatically
detach the specified policy from
respective interfaces, and deletes the TF
policy.
Command (in TF-CM) Description
pass-through protocol {< 1-
65535 >| appletalk | ipx | nonip }
This command is used to define how the
non-IP packets should be treated in a TF
configuration.
Using this command, other protocols like
IPX, Apple-talk can be configured to be
bridged across the transparent firewalling
interfaces.
Using this command more than once will
add the protocol to existing configured
protocols.
Note: By default, IP and ARP
protocols are configured as
passthrough protocols.
no pass-through protocol {< 1-
65535 >| appletalk | ipx | nonip }
The command removes the pass through
configuration.