Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 1069 / 1193

Lifeline
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1043
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
C
ONFIGURE A
S
TATIC
R
OUTE FOR
L
IFELINE
M
ANAGEMENT
S
TATION
A
CCESSIBILITY
This command adds a special Lifeline static route, which allows you to configure a
route to a management station well-known to you. This is used during Lifeline
only
. When the OA-780 is in Lifeline mode, the Lifeline Agent will add this route to
its local RIB , which ensures that a route exists to the management station.
Note: You must ensure that this route is reasonable and correct, and that other routers along
the route path chosen are willing to handle the routing as well. This route is similar to a
default static route. The interface used for forwarding packets via this route must be
one of the line cards that support lifeline. See
“Interface Cards that are Currently
Supported”
E
XAMPLE
ALU(config)# lifeline ip route 20.20.20.20/24 192.168.0.1
255.255.255.255 203.121.10.1 Serial 0/0:0 10
Command (in CM) Description
lifeline ip route < destination
ip-address subnet-mask>
<destination ip-address/
prefix-length> < next-hop-ip-
address > <interface-name>
< slot/port > [< 1-255 >]
This command is used to add a pre-
configured route for Lifeline Mode.