High-level Data Link Control
Left running head:
Chapter name (automatic)
288
Beta
Beta
CLI Configuration Guide
Alcatel-Lucent
ALU(config)#interface Serial0/0
ALU(config-if Serial0/0)#
For more details on configuring a Serial interface (V.35/X.21), refer to the
“Universal
Serial Port (USP) Line Card”
chapter.
Step 6:
Enter Serial interface configuration mode
ALU(config)# interface Serial
<slot/port:channel>
ALU(config-if Serial
<slot/port:channel>
)#
Example:
ALU(config)#interface Serial0/0:0
ALU(config-if Serial0/0:0)#
Step 7:
Administratively bring up the interface
ALU(config-if <
interface-name
>)# no shutdown
Example:
ALU(config-if Serial0/0:0)# no shutdown
Step 8:
Configure IP address for the interface
ALU(config-if <
interface-name
>)# ip address {
<ip-
address subnet-mask>|<ip-address/prefix-length>
}
Example:
ALU(config-if Serial0/0:0)# ip address 20.20.20.20/24
Step 9:
Configure HDLC encapsulation. By default, the system has HDLC
encapsulation on an interface. There is no need to explicitly configure it. See
“To
Configure HDLC Encapsulation”
Note:
If the encapsulation on the interface is pre-configured for either Frame Relay or PPP
(Point to Point), then configure HDLC encapsulation. See
“To Set Encapsulation to its
Default (HDLC)”
Step 10:
Configure the HDLC Keepalive Interval. See
“To Configure HDLC
Keepalive Interval”
(Optional)
Step 11:
Configure loopback detection. See
“To Enable Loopback Detection”
command.
(Optional)
Step 12:
View the status of HDLC. See
“Show Interface Status”
Summary of Contents for OmniAccess 700
