Port Monitoring Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
229
Alcatel-Lucent
Beta
Beta
CLI Configuration Guide
P
ORT
M
ONITORING
C
ONFIGURATION
The following lists the steps to configure Port Monitoring on the OA-700:
P
ORT
M
ONITORING
C
ONFIGURATION
S
TEPS
Step 1:
Configure L2 interface.
ALU(config)# interface switchport <
slot/port>
ALU(config-if switchport
<slot/port>
)#
Example:
ALU(config)# interface switchport 1/0
ALU(config-if switchport1/0)#
Note:
The L2 interface on which port monitoring is being configured should not be in ‘Trunk/
Hybrid’ mode. And, also 802.1X should not be configured on the interface.
Step 2:
Administratively bring up the interface.
ALU(config-if <
interface-name
>)# no shutdown
Example:
ALU(config-if switchport1/0)# no shutdown
Step 3:
Configure Port Monitoring. See
“To Configure Port Monitoring”
Step 4:
View port monitoring configuration details.
“To View Port Monitor Details”
Summary of Contents for OmniAccess 700
