Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 92 / 1193

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
66
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
E
XAMPLE
ALU(config)# tacacs-server auth-port 100
ALU(config)# tacacs-server key test1
ALU(config)# tacacs-server timeout 10
Command (in CM) Description
[ no ] tacacs-server auth-
port < 1-1000 >
This command is used to specify a global
authentication port that will be applied to all
the Server Groups (provided there
is no server specific port configured).
The default authentication port is 49.
The ‘ no’ command deletes the global
auth-port from the configuration,
and resets it to default (for all servers that do
not have a server specific port).
[ no ] tacacs-server key { 5
[< string> ]| <string >}
This command is used to specify a global key
that will be applied to all the
Groups (provided there is no server specific
key configured).
If ‘ 5 ’ option is used, then enter the key string
in an encrypted format.
The default key is “” (empty string).
The ‘ no’ command deletes the global
key from the configuration, and
resets it to default (for all servers that do not
have a server specific key).
[ no ] tacacs-server timeout
< 1-1000 >
This command is used to specify a global
timeout value that will be applied to all the
Groups (provided there is no
server specific timeout value configured).
The default timeout value is 5 seconds.
The ‘ no’ command deletes the global
TACACS timeout value from the
configuration, and resets it to default (for all
servers that do not have a server specific
timeout value).