Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 256 / 1193

Port Monitoring
Left running head:
Chapter name (automatic)
230
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
P
ORT
M
ONITORING
C
OMMANDS
T
O
C
ONFIGURE
P
ORT
M
ONITORING
E
XAMPLE
The following example shows that the switchports 1/6 and 1/7 are to be
monitored. Switchport 1/0 being the monitoring port, the port receives the mirrored
data from switchports 1/6 and 1/7.
ALU(config-if switchport1/0)# port monitor switchport 1/6
both
ALU(config-if switchport1/0)# port monitor switchport 1/7
ingress
ALU(config-if switchport1/0)# no port monitor switchport 1/7
ingress
T
O
V
IEW
P
ORT
M
ONITOR
D
ETAILS
E
XAMPLE
ALU (config)# show port monitor
PORT-MONITERING PORT-MONITERED TRAFFIC-TYPE
--------------- -------------- ------------
switchport1/0 switchport1/6 both
switchport1/7 ingress
Command (in ICM) Description
port monitor interface
switchport < slot/port >
[{ both | egress | ingress }]
This command is entered in the Interface
Configuration Mode. This command is
used to configure port monitoring.
Specify the traffic to be monitored. You
can either monitor ingress/egress traffic
or both.
By default, the both (egress and ingress)
traffic is monitored.
no port monitor interface
switchport < slot/port >
[{ both | egress | ingress }]
This command is used to disable port
monitoring. Specify the slot/port on
which traffic is not to be monitored.
Command (in SUM/CM) Description
show port monitor [ interface
switchport < slot/port >]
This command displays the port
monitoring details on the specified port.