Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 1037 / 1193

DNS Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1011
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
DNS C
LIENT
C
ONFIGURATION
S
TEPS
The following steps details the procedure to configure DNS Client on OA-700:
Step 1: Configure an interface. Enter Interface Configuration Mode.
ALU(config)# interface < name >
Example:
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)#
Step 2: Administratively bring up the interface
ALU(config-if < interface-name >)# no shutdown
Example:
ALU(config-if GigabitEthernet7/0)# no shutdown
Step 3: Configure IP address for the interface
ALU(config-if < interface-name >)# ip address { <ip-
address subnet-mask>|<ip-address/prefix-length> }
Example:
ALU(config-if GigabitEthernet7/0)# ip address
20.20.20.20/24
Step 4: Enable domain lookup. See “To Enable/Disable IP Domain Lookup”
Step 5: Specify DNS server to which the requests are to be sent. See “To Specify
DNS Server”
Step 6: Configure DNS Client optional parameters.
•
Configure default domain name. See “To Configure Default Domain
Name”
•
Configure domain list. See “To Configure Domain List”
•
Add a static address mapping for hosts. See “To Add a Static Address
Mapping”
•
Configure Host-max-age. See “To Configure Host-max-age”
Step 7: View the DNS Client by using the show commands. See “To View DNS
Client Configuration”