Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 1079 / 1193

Web Cache Server Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1053
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
W
EB
C
ACHE
S
ERVER
C
ONFIGURATION
The following sections describe the Web Cache configuration:
•
“Web Cache Configuration Steps”
•
“Web Cache Configuration Flow”
•
“Web Cache Server Configuration Commands”
W
EB
C
ACHE
C
ONFIGURATION
S
TEPS
This section describes configuration of Web Cache on the OA-700.
Step 1: Enter ASE mode. See “To Enter ASE Configuration Mode”
Step 2: Configure ASE IP address. See “To Configure IP Address for ASE”
Step 3: Install Web Cache. See “To Install Web Cache Server”
Step 4: Configure Web Cache Server parameters. See “Web Cache Server
Parameters” ( Optional )
Step 5: Start the Web Cache Server. See “To Start Web Cache Service”
Step 6: View the Web Cache configuration. See “Web Cache Show Commands”
Note:
•
[ ^ ] in the command indicate negation.
•
no - The 'no' form of a command is issued to either set it to its default value or to
negate it.
•
<x>... Braces enclosing keywords or arguments with a semicolon and with ‘…’
indicate that the element within the brace may be repeated.