Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 129 / 1193

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
103
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
R
EMOVE A
P
ACKAGE
E
XAMPLE
To remove 2.2.25 package:
ALU(config)# package remove 2.2.25
Remove package 2.2.25? (y/[n]) : y
Uninstalling application package 2.2.25...OK.
P
ACKAGE
S
ET
-
DEFAULT
E
XAMPLE
To set the package 2.1.23.1 as default:
ALU# package set-default 2.1.23.1
Do you want to set-default immediately?
Yes: Chassis will be rebooted automatically
No : Manually run set-default at a later time
Proceed? (y/[n]) : y
Do you want to save config before proceeding ([y]/n) : y
Building configuration...
[OK]
Setting Default image to 2.1.23.1...
Command (in SUM/CM) Description
package remove <package-name>
Removes the specified package.
However, the default package cannot be
removed.
Command (in SUM/CM) Description
package set-default <package-
name>
If the specified package is not the default
package, it is set as default.
The system can have multiple
application packages (like 2.1.7.1,
2.1.8.1). The package being set as
default should exist in the system.