Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 710 / 1193

Filter and Firewall
Left running head:
Chapter name (automatic)
684
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
C
ONFIGURE
F
IREWALL
P
OLICY
E
XAMPLE
The following example depicts firewall policy configuration:
ALU(config-firewall)# policy P1
ALU(config-firewall-P1)#
T
O
C
REATE A
D
O
S R
ULE
I
NSIDE A
F
IREWALL
P
OLICY
Note: Currently, multiple match-lists cannot be associated to a firewall policy rule. To
configure more than one match-list within a firewall policy, add multiple rules with
different match-lists.
Command (in FwCM) Description
policy < name>
Enter this command in the Firewall
Configuration Mode.
This command is used to configure a
firewall policy. This enters the firewall
policy sub-configuration mode
Command (in F-PCM) Description
[< 1-65535 >] match { any | all }
<match-list name>... attack
<name> { drop | reset } [ time-
range < name >]
Enter this command in the Firewall
Policy Configuration Mode.
This command is used to attach an
attack object to a firewall policy, and
create rules (associate match-lists and
set priority for the rule) for a firewall
policy, and also set the action drop or
reset for the configured rules.
The range for the rule number is 1-
65535. This rule number signifies the
priority of a rule. By default, the
numbering pattern for rule number is the
next multiple of ten to the highest
existing rule number.
The keyword “ drop ” drops the packets,
and “ reset ” also drops the packets but
sends an error message or an
acknowledgement to the sender.