Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 289 / 1193

T1 Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
263
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
C
ONFIGURE
F
RAMING ON
T1
The service provider determines which framing type, either sf or esf is required for
your T1 circuit.
E
XAMPLE
The following example configures frame type as super frame for T1:
ALU(config-controller T1)#framing sf
The following example resets the T1 frame type to esf:
ALU(config-controller T1)# no framing
T
O
C
ONFIGURE
L
INECODING ON
T1
The T1 service provider determines which line-code type, ami, or b8zs, is required
for your T1 circuit.
E
XAMPLE
The following example specifies AMI as the linecode type for a T1 line:
ALU(config-controller T1)# linecode ami
The following example sets b8zs, as the linecode type:
ALU(config-controller T1)# no linecode
Command (in CCM) Description
framing { esf | sf }
This command is entered in the
controller configuration mode to
configure framing type.
no framing
The “ no ” command sets the framing to
its default.
The default framing value for T1 is
esf.
Command (in CCM) Description
linecode { ami | b8zs }
This command is entered in the
controller configuration mode to
configure the line-code type for a T1 line.
no linecode
The “ no ” command sets the linecoding
value its default.
The default linecoding value is b8zs.