Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 716 / 1193

Filter and Firewall
Left running head:
Chapter name (automatic)
690
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
V
IEW THE
S
ESSION
P
ROTOCOL
E
XAMPLE
The following syntax is used to view the details of firewall session with respect to
TCP protocol:
ALU(config)# show firewall session proto icmp
ID 70 ICMP timeout 19 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
T
O
V
IEW
S
ESSION
D
ETAILS WITH
S
OURCE
- D
ESTINATION
G
IVEN
E
XAMPLE
ALU(config-if GigabitEthernet7/1)# show firewall session source
10.91.1.108
ID 70 ICMP timeout 25 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
ALU(config-if GigabitEthernet7/1)#show firewall session
destination ip 10.91.0.1
ID 70 ICMP timeout 25 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
Command ( in SUM ) Description
show firewall session
[ proto { tcp | udp | icmp }]
This command displays the firewall
sessions with respect to the protocol
type.
Command ( in SUM ) Description
show firewall session [ source
{< ip-address> | <ip-address/prefix-
length> } [< 1-65535> ]]
This command is used to view the
firewall session details given the
source address.
show firewall session
[ destination {< ip-address> | <ip-
address/prefix-length> } [{< 1-
65535>|proto { gre | icmp | tcp | udp }]
This command is used to view the
firewall session details given the
destination address.