Frame Relay
Left running head:
Chapter name (automatic)
306
Beta
Beta
CLI Configuration Guide
Alcatel-Lucent
D
ATA
-L
INK
C
ONNECTION
I
DENTIFIER
FR virtual circuits are identified by DLCIs. These values are typically assigned by
the FR service provider. The DLCIs have a local significance, which means their
values are unique to the link.
Note:
The system provides support for point-to-point FR DLCIs only. A DLCI is configured
on an interface or a sub-interface.
T
O
C
ONFIGURE
DLCI
E
XAMPLE
The following example sets the DLCI value to 100:
ALU(config-if Serial 0/0:0)# frame-relay interface-dlci 100
The following example deletes the DLCI configured:
ALU(config-if Serial 0/0:0)# no frame-relay interface-dlci
100
Note:
FR can also be configured on a sub-interface. And, multiple sub-interfaces
with FR can be configured.
For configuring Frame Relay on a sub-interface, follow the steps given below:
Step 1:
Repeat the steps
Step 1 to Step 7
as given in the section
“Frame Relay
Configuration Steps”
Step 2:
Configure sub-interface on the serial interface.
ALU(config)# interface Serial <
slot/port:channel.subchannel>
ALU(config-if Serial <
slot/port:channel.subchannel>
)#
Example:
ALU(config)# interface Serial 0/0:0.1
ALU(config-if Serial0/0:0
.
1)#
Step 3:
Configure IP address for the sub-interface
ALU(config-if Serial <
slot/port:channel.subchannel>
)# ip
address {
<ip-address subnet-mask>|<ip-address/prefix-length>
}
Command (in ICM/Sub-ICM)
Description
frame-relay interface-dlci
<
16-1007>
This command is used to configure a
DLCI on an interface/sub-interface.
no frame-relay interface-dlci
<
16-1007>
The “
no
” command deletes the
configured DLCI from the interface.
Summary of Contents for OmniAccess 700
