Abbott i-STAT 1 System Manual Download Page 165

Page: 165 / 658

Art: 730292-00A

Rev. Date: 20-Feb-12

CUSTOMIZING OPERATOR COMPETENCY NOTIFICATION ON THE i-STAT 1 HANDHELD

USING i-STAT / DE

1. Access the Customization Workspace

2. If the location where this handheld is assigned has a check mark under the

Use Default Profile

column, double click the alphanumeric code under

Preferences

in the

Default Customization

Profile

column. Otherwise, double click the alphanumeric code under

Preferences

for the

specific location to which this handheld is assigned.

Once the

Preferences

window opens, click on the

Instrument

tab.

4. In the

i-STAT Reserved

Data section, type “CE=XXX”, where XXX indicates the number of days

(between 1 and 255) in which the operator will be notified of their certification expiration.

5. Click

and answer

YES

to the question about changing the Preferences.

6. Download the handheld(s) to the CDS from a downloader in the location to which the handheld

is assigned. This action should upload the chosen customization features into the handheld.

Repeat step 6 for all handhelds from the same location to be customized. To customize

handhelds from other locations for the same features, return to step 1.

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands

Abbott i-STAT 1, System Manual

Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands