manualshive.com logo in svg

Abbott i-STAT 1, System Manual

The VetScan i-STAT 1 user manual is available for free download from our website. This comprehensive Operator's Manual provides detailed instructions on how to operate and maximize the capabilities of the VetScan i-STAT 1 device. Access this invaluable resource today at manualshive.com and get the most out of your product.

Share
Download
background image

ROUTINE CARE of the ANALYZER and DOWNLOADER

17

Art: 714379-00F 

Rev. Date: 18-Jul-12 

17-1

Drying a Wet 

Analyzer or 

Downloader

If the analyzer is placed on a wet surface or if any liquid is spilled onto it, dry 
the analyzer immediately.  If liquid enters the following compartments, the 
analyzer may be damaged:

 

The electronics compartment

 

The battery compartment

 

The cartridge port

The Downloader may also be damaged by liquid contamination.  Unplug the 
power supply from the outlet and dry the Downloader completely.

Clean the display screen and the case using a gauze pad moistened with any 
of the following:

 

A mild non-abrasive cleaner

 

Detergent

 

Soap and water

 

Alcohol

 

10% bleach solution

 

PDI

 

Super Sani-Cloth

 (solution of IPA, n-Alkyl dimethyl 

ethylbenzyl- and benzyl- ammonium chloride)

Rinse the case using another gauze pad moistened with water and dry.  Avoid 
getting excess fluids in the seam between the display screen and the case.

(PDI and Sani-Cloth are registered trademarks of Sani-System

 Brand Products, 

the Health Care Division of Nice-Pak Products, Orangeburg, NY, USA.)

Cleaning the 

Analyzer and 

Downloader

Caution

Exercise universal safety precautions at all times when handling the 

analyzer,  cartridges, and peripherals to prevent exposure to blood-born 

pathogens.

The analyzer is NOT designed to be sterilized or autoclaved by any method, 
including those using gas (e.g. steam, ethylene oxide, ect...) high heat, bead, 
radiation, or other chemical processes. The analyzer is splash resistant, but 
should not be immersed in any liquids.  

Dispose of analyzer, peripheral electronics, and batteries according to local, 
state, and/or national guidelines.

If the analyzer is not to be used for an extended period of time, the batteries 
should be removed to prevent leakage.

Decontaminate the analyzer or Downloader whenever a specimen is spilled 
onto it or if the item is to be returned to i-STAT for repair.  Wear gloves while 
performing the following procedure.

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for i-STAT 1

Accu-Chek GO Quick Reference Manual preview
GO
Brand: Accu-Chek Pages: 2
MICROPOINT qLabs ElectroMeter User Manual preview
qLabs ElectroMeter
Brand: MICROPOINT Pages: 141
Zoetis AlphaTRAK 2 User Manual preview
AlphaTRAK 2
Brand: Zoetis Pages: 39
AMSL Diabetes Glooko Transmitter Getting Started Manual preview
Glooko Transmitter
Brand: AMSL Diabetes Pages: 4
i-SENS CareSens II Owner'S Booklet preview
CareSens II
Brand: i-SENS Pages: 25
Accu-Chek Performa Connect Operator'S Manual preview
Performa Connect
Brand: Accu-Chek Pages: 68
Metene TD-4116 Owner'S Manual preview
TD-4116
Brand: Metene Pages: 38
Lifescan OneTouch Delica Quick Start Manual preview
OneTouch Delica
Brand: Lifescan Pages: 2

Brands by name

Popular brands

Load more brands