Abbott i-STAT 1 System Manual Download Page 277

Page: 277 / 658

Art: 725768-00E

Rev. Date: 04-Jan-12

The following window will appear:

1.5:

Central Data Station (CDS) Version 5 users must perform this additional step before

proceeding. All other users should skip this step and proceed to step 1.6.

Double click on

AXX_i-STAT_Analyzer_Software

Double click

TRANSFER.BAT

Next, an additional window will open briefly, then close. Return back to the main

CD-ROM page and proceed to step 1.6.

1.6:

To open the JammLite Utility, Double click

and

then Double click

If the JammLite program does not launch or you receive an error message, con-

tact APOC Technical Support and tell the support specialist you are unable to

complete step

1.6 of this document.

1.7: In the JammLite utility, select the i-STAT 300 Analyzer within the Instrument drop-
down menu.

1.8:

Select

TCP/IP within the Port dropdown menu.

1.9: Type the IP Address of the Network Downloader being used for the software
update in the

IP Address box.

Note: the address used above is for example only.

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands

Abbott i-STAT 1, System Manual

Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands