Abbott i-STAT 1 System Manual Download Page 163

Page: 163 / 658

Abbott Point of Care Inc.

• Abbott Park, IL 60064 • USA

Art: 730292-00A

Rev. Date: 20-Feb-12

TECHNICAL BULLETIN

i-STAT

OPERATOR COMPETENCY NOTIFICATION ON THE

i-STAT 1 HANDHELD

OVERVIEW

As part of the on-going READi initiative (

esponds,

nhances,

elivers

nnovation), Abbott

Point of Care (APOC) has released a new Operator Competency Notification feature for the i-STAT 1

handheld. This new feature allows a system administrator (e.g. Point of Care Coordinator or Laboratory

Administrator) to define a time period in which the operator will be notified by a message on the i-STAT 1

handheld display of their competency expiration date. By default, the feature is turned off.

Functionality

The system administrator will define a time period of notification in the Customization Workspace of

the data management system. When the operator scans or enters their operator ID in the i-STAT 1

handheld, if their competency certification will expire within the timeframe set by the system administrator,

a message will appear on the handheld display alerting them of the expiration date.

GENERAL NOTES AND CONSIDERATIONS

The Operator Competency Notification feature is only available on the i-STAT 1 handheld, and not

the i-STAT Portable Clinical Analyzer (i-STAT 200 series model).

In order to create Operator Competency Notifications, users must have the i-STAT 1 handheld

and either the Central Data Station Version 5 or i-STAT/DE data management applications. This

feature is not customizable through the i-STAT 1 handheld keypad

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands

Abbott i-STAT 1, System Manual

Search results

Summary of Contents for i-STAT 1

Reviews:

Related manuals for i-STAT 1

Brands by name

Popular brands