Abbott i-STAT 1 System Manual Download Page 89 | Manualshive

Page: 89 / 658

background image

Abbott Point of Care Inc.

• Abbott Park, IL 60064 • USA

:

t

r

A

728730-00C

Rev. Date: 02-Dec-11

TECHNICAL BULLETIN

i-STAT

®

.

i-STAT Printer Storage and Battery Check Notice

This Technical Bulletin provides supplemental instruction on i-STAT Printer Storage and
assessing i-STAT Printer Rechargeable Battery charging status. This notice supersedes
Technical Bulletin: i-STAT Printer Rechargeable Battery Notice (Art# 728730-xxB).

Printer Storage Instructions
When the Printer is not in use for an extended period:
• Keep the AC adapter connected to wall outlet and Printer, if possible.
• If AC power is unavailable, disconnect the i-STAT Printer Rechargeable Battery
from the Printer. Failure to remove the battery may result in the inability for the
battery to be charged following storage.

Battery Check
If the battery does not appear to accept charge during regular use, follow the
instructions below to determine if the i-STAT Printer Rechargeable Battery is capable of
charging:

1. Plug AC adapter into Printer and wall outlet and install i-STAT Printer
Rechargeable Battery into the i-STAT Printer.
2. Make sure the Printer is turned off. Perform a self test on the i-STAT
Printer by pressing the Paper Feed button then the Power button and
holding both down until printing starts.
3. If the battery can be charged, the last line of the self test print out will
state “Charging Enabled”. If the battery cannot be charged, the last line
will state “Charging Disabled”.

If you have questions regarding the information in this Technical Bulletin or need additional
support, please contact Abbott Point of Care Technical Support at 800-366-8020, option 1, or by
email at

[email protected]

.

i-STAT is a registered trademark of the Abbott Group of Companies in various jurisdictions.

«
...
87
88
89
90
91
...
»

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for i-STAT 1

Brand: Medtronic Pages: 56

Brand: Lactate Pages: 4

Brand: OmniPod Pages: 194

Brand: Microtech Pages: 66

AutoSense Voice

Brand: Electronika Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands