manualshive.com logo in svg

Abbott i-STAT 1, System Manual

The VetScan i-STAT 1 user manual is available for free download from our website. This comprehensive Operator's Manual provides detailed instructions on how to operate and maximize the capabilities of the VetScan i-STAT 1 device. Access this invaluable resource today at manualshive.com and get the most out of your product.

Share
Download
background image

6 - 4

 

Art: 714368-00K 

Rev. Date:  02-Aug-12

Transmitting Data 

from Downloader to 

the Data Manager

Transmitting Data 

from Downloader 

/ Recharger to the 

Data Manager

To transmit data through a Downloader/Recharger, place the analyzer in the 
Downloader/Recharger’s cradle.  When properly aligned, the blue proximity 
light will turn on and the analyzer will automatically transmit (upload) all 
unsent results. (The analyzer does not need to be turned on.)  Do not move 
the analyzer while the message “Communication in Progress” is displayed on 
the screen.

To transmit through a Downloader to the Data Manager, place the analyzer 
between the arms on the front of the Downloader with the test strip port end 
touching the Downloader.  When properly aligned the red proximity light will 
turn on and the analyzer will automatically transmit (upload) all unsent results.  
(The analyzer does not need to be turned on.)  Do not move the analyzer while 
the message “Communication in Progress” is displayed on the screen.

Transmitted 

Information

The following information is transmitted from the analyzer with each test 
record:

 

The date and time the test was performed

 

Operator ID and Patient ID or Quality Test fluid lot 
number

 

All information entered by the operator, such as lot 
numbers, sample type and comment codes

 

Result(s)

 

Serial number of the analyzer

 

Uses count of the analyzer

 

Application software version in the analyzer

 

Standardization software in the analyzer

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for i-STAT 1

Bioptik EasyTouch GCU User Manual preview
EasyTouch GCU
Brand: Bioptik Pages: 2
eoshealth IN TOUCH Owner'S Manual preview
IN TOUCH
Brand: eoshealth Pages: 89
EASY DOCTOR C21 Manual preview
C21
Brand: EASY DOCTOR Pages: 6
Accu-Chek FastClix Instructions preview
FastClix
Brand: Accu-Chek Pages: 2
VETEXPERT BG Vet Instructions preview
BG Vet
Brand: VETEXPERT Pages: 2
Vaccixcell GlucCell User Manual preview
GlucCell
Brand: Vaccixcell Pages: 14
AIDIAN Nova StatStrip Brief Instructions preview
Nova StatStrip
Brand: AIDIAN Pages: 2

Brands by name

Popular brands

Load more brands