Abbott i-STAT 1 System Manual Download Page 377 | Manualshive

Page: 377 / 658

background image

Rev. Date: 07/18/06

Art: 714384-00D

22-43

CustomizAtion WorKsPACe

overview

This workspace is used to create profiles with site specific test characteristics
for the analyzers. See the Customization section of this manual for details of
items that can be customized and their default settings.

enabling
Customization

To  enable  customization,  click  the  box  to  check  it.  When  customization  is
enabled,  the  Central  Data  Station  will  check  the  Customization  Profile  for
the  location  each  time  an  analyzer  is  downloaded.    If  the  location  has  the

enable updates option checked, the Central Data Station will update the
analyzer with the current Customization Profile for that location as noted below.

•

Analyzers designated to Report location as download location in the

Instrument workspace will be updated with the Customization Profile
assigned to the download location, regardless of the location to which
the instrument is assigned. Care should be taken when downloading
instruments from locations other then their assigned location.

•

Analyzers designated to Always report location as this assignment in the

Instrument workspace will always be updated with the Customization
Profile for the instrument’s assigned location, regardless of the physical
location from which it downloads.

If a location has the

enable updates option unchecked, downloading

from that location will result in no customization changes being made to
analyzers designated to

report location as download location. Analyzers

designated to

Always report location as this assignment will not be updated

if the assignment location for the instrument has the

enable updates option

unchecked, regardless of the setting associated with the physical location from
which it downloads.

User can also disable/enable CLEW updates by location. The default setting is
to have the CLEW updates occur automatically for all locations. To disable a
particular location, simply click on the corresponding check box under

update

CLeW to remove the check mark.

Password

The Customization Workspace is password protected. If the Security feature is
disabled, the default password is

istat. If the Security feature is enabled, the

user uses the same password as their CDS application logon password. To
change the password, select

tools and Change Password from the menu bar.

A password from 3 to 8 characters can be used.

«
...
375
376
377
378
379
...
»

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for i-STAT 1

GLUCOCARD Shine Connex

Brand: Arkray Pages: 61

Brand: NOVA BIOMEDICAL Pages: 74

Brand: iHealth Pages: 41

Brand: Sanofi-aventis Pages: 48

Brand: CESCO Pages: 19

Brand: Abbott Pages: 36

Brand: Access Pages: 7

Respironics SimplyGo

Brand: Philips Pages: 121

Brand: TysonBio Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands