Abbott i-STAT 1 System Manual Download Page 337 | Manualshive

Page: 337 / 658

background image

Rev. Date: 07/18/06

Art: 714384-00D

22-3

instALLAtion of the CentrAL dAtA stAtion

Hardware

The PC on which the CDS software resides must meet specifications
provided by Abbott Point of Care Inc. and should be installed following the PC
manufacturer’s directions. Install the printer if applicable.

Software
installation:
license Key

A license key is required to install the Central Data Station software. The
license key ensures that the end user agrees to the License Agreement which is
displayed during installation. To obtain the license key, follow the instructions on
the screen and listed below.

1. Insert the CDS CD and the installation will begin automatically.

2. Click

next> in the Welcome dialog.

3. The End-User License Agreement will be displayed. Read the

agreement and if you agree to abide by the agreement, click

yes to

proceed with the installation. If you do not agree, click

no to abandon

the installation.

4. Record the serial number of the CDS displayed in the

Enter License Key

dialog.

5. Go to the Abbott Point of Care Inc. web site at http://www.

abbottpointofcare.com and click on the i-STAT panel in the lower left
corner of the screen. Click on the link under

Cds Key generator in the

right hand column. You can also access this link directly at http://www.
abbottpointofcare.com/cdslicense. (In the USA, the license key can
also be obtained from Technical Support.)

6. If you are already registered, skip to step 8. If you are not registered, fill

out the required information, select Basic Access, and click

register.

7. Go back to the i-STAT web site as directed in step 5.

8. Enter your username and password and click

Login.

9. You may now enter the serial number recorded in step 4, and click

submit.

10. If successful, a message will appear indicating that your key has been

e-mailed to the address with which you registered.

11. Obtain the key from the e-mail and enter it in the space provided on the

CDS.

12. Click

next to proceed with the installation.

Caution

The use of other software that was not provided as part of the system on the
same PC with the Central Data Station software may compromise the system,
including permanent loss of patient records.

Site Specific
Customization of
the CDS

During  installation,  the  CDS  must  be  customized  to  properly  communicate
with  i-STAT  1  Downloaders  and  Downloader/Rechargers,  i-STAT  IR  Links  and
Philips Medical Systems Blood Analysis Modules throughout the hospital.  The
procedure to customize the CDS is described under the Customization section
below.

«
...
335
336
337
338
339
...
»

Summary of Contents for i-STAT 1



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for i-STAT 1

FreeStyle Libre 2

Brand: Abbott Pages: 9

Brand: bloom Pages: 56

Glucoject Dual PLUS

Brand: A. Menarini Diagnostics Pages: 3

Brand: OAK TREE HEALTH Pages: 48

Brand: DailyChek Pages: 48

CareSens N Voice

Brand: i-SENS Pages: 2

Brand: Permobil Pages: 44

Brand: NURSE ROSIE Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands