background image

Use only with TRUE METRIX

® 

Self Monitoring Blood Glucose 

Test Strips

24/7 Customer Consultation

English or Spanish

1-800-803-6025

www.niprodiagnostics.com

© 2015 Nipro Diagnostics, Inc.
TRUE METRIX and the Nipro Diagnostics logo are
trademarks of Nipro Diagnostics, Inc.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Nipro Diagnostics Inc.
is under license. Other trademarks and
trade names are those of their respective owners.
REA4NPD03 Rev. 5

Owner’s Booklet

SELF MONITORING BLOOD GLUCOSE SYSTEM

Manufactured by:

Fort Lauderdale, FL 33309 U.S.A.

AIR

Fabr

icado por:

TRUE METRIX y el logotipo de Nipro D

iagnostics

son marcas c

omerciales de Nipr

o Diagnostics Inc

.

La marca denomina

tiva Bluet

ooth® y los logotipos

son marcas c

omerciales r

egistradas de Bluet

ooth

SIG, Inc. y t

odo uso de dichas marcas por par

te de

Nipro D

iagnostics Inc. se r

ealiza bajo licencia.

Las demás marcas c

omerciales y nombr

es comer

ciales

pertenec

en a sus respec

tivos pr

opietarios.

REA4NPD03 Rev. 5

SISTEMA PAR

A AUT

OCONTR

OL DE GLUC

OSA 

EN SANGRE

Usar únic

amente c

on las tiras 

de prueba de glucosa en sangr

para aut

ocon

trol 

TRUE ME

TRIX®

Atención al clien

te las 24 hor

as, 

los 7 días de la semana

Inglés o español

1-800-803-6025

ww

w.nipr

odiagnostics.com

Manual del propietario

Summary of Contents for METRIX AIR


































































Reviews: