Extinguishing
Configuring flooding zone control
16
376 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
'Effects' functions – parameters in the 'Overview' tab
The 'Effects' functions have defined parameters. The following functions are
exceptions:
●
'Sounder'
●
'Illuminated warning panel'
You will find information about the parameters of both functions in a separate
section further down in this chapter.
Parameters which do not apply to an 'Effects' function are grayed out.
Parameters
Values
Description
'Function'
'Actuator/valve'
Defines the type of the 'Effects' function.
The type assignment influences the
isolation of the controlled function
elements. On the extinguishing terminal,
it is possible to disable the control of
certain function elements, such as
'Actuator/valve', 'Fire controls', or
'External equipment'.
'Exting. fire control'
'External equipment'
'Activation state'
''Pre-activated' phase'
Defines the state in which the
extinguishing system must be for the
control to activate the 'Effects' function.
The parameter is specified in the relevant
function template and cannot be
adjusted.
''Activated' phase'
''Activated' phase', main cylinder bank'
''Activated' phase', reserve cylinder
bank'
'Automatic release activated'
'Manual release activated'
'External release activated'
'Emergency hold active'
'Emergency abort'
''Release actuator' phase'
''Release actuator' phase, main
cylinder bank'
''Release actuator' phase, reserve
cylinder bank'
''Released' phase '
'Automatic release blocked'
'Manual release blocked'
'Mechanically blocked'
'Reserve cylinder bank selected'
'Loss of agent'
'Fire controls OFF'
'Isolation'
'Fault'
