'Operation' task card
Person Machine Interface (PMI)
13
274 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
Configuring a reverse command
Figure 104: Configuring a reverse command
1. Highlight the assigned command in the tree view.
2. Select the 'Overview' tab in the detail editor.
3. Check the 'Enabled' checkbox.
4. In the 'Reverse command' field, select the reverse command, e.g., 'Detector
test END'.
a
The reverse command is configured.
When you assign a command which requires a more detailed specification, you
must set the 'Reverse command parameter' property additionally in the detail
editor. If you have assigned the 'OFF/timer' command, for example, you must set
the desired time.
Figure 105: Configuring a reverse command
Assigning the standard key to the LED
Figure 106: Assigning the standard key to the LED
1. Highlight the configured standard key in the tree view.
2. In the menu bar, click on 'Assign'.
a
The 'New effect dialog' window opens.
