KW DAVID 613 Скачать руководство пользователя страница 48

Страница: 48 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613

DAVID-D613-V125-E 13.04.2021

Page - 48 -

2.16 Device Description Modem GSM GSM-CT63 - NG

As the name suggests, the GSM-16 module is a GSM

modem of the latest design for operation in the D net-

works.

The mobile card must contain the option of data com-

munication.

The modem is connected to the second serial interface

of the DAVID central unit.

The settings are made in the DAVID-613 central unit in

menu 621.

2.17 Device Description extern Emergency intercom systems with GSM-Modem

The dial-up connection is also made

possible by the intermittent emergency

call systems of Telegärtner GSM 110,

Safeline SL6, Leitronic EA GSM, Am-

phitech AS0300 CSD, Base GSM-13

and MS AG 4104.

For all systems, serial cables are avail-

able for coupling to the central unit.

Содержание DAVID 613









































































































































































































































































Результаты поиска

Содержание DAVID 613

Отзывы:

KW DAVID 613, Руководство по эксплуатации, Страница: 48 / 264

Результаты поиска

Содержание DAVID 613

Отзывы: