KW DAVID 613, Руководство по эксплуатации, Страница: 146 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 146 -
- Parameter: Park Trip -> Dynamic
-
Parameter: Parks after -> Adjustable from 1 to 15 minutes, up to the
departure
- Parameter: Door position -> Open /Close
PARAMETER: DOOR POSITION PARKING
In the parameter B606 if the park trip was activated, then the door position can be put in the park level
in this parameter. The attitudes “ open” and “ closed” are present, whereby “ open” represents the
standard value.
Temporal blockage of floors takes place with the timers from the menu B615
B607 – FLOOR BLOCKING
General
In order to regulate the flow of traffic to ensure and/or an access control it is possible to close certrain
levels.
BLOCKAGE OF FLOORS BY PARAMENTER ATTITUDE
The permanent blockage of levels can be met by the parameter attitudes. Landing- and car calls are
erased for these floors.
PARAMETER: FLOOR BLOCKING
This parameter activated through to set the indication „*“ on certain floors. These floors are closed in
the further enterprise, in those determined floors are closed.
PARAMETER: DYNAMIC BLOCKING
If this parameter is activated, the normal landing call handling must take place over the remote station
ER. Then the call entrances at the ZR can be used for the floor blockade. The following attitudes exist:
- Only car calls
- Only landing calls
- Car calls and landing calls
PARAMETER: DYNAMIC BLOCKAGE ENTRANCE
You can choose between:
1) Normally with plants of a +24V of level the floor is closed
2) Inverted with plants of a 0V of level the floor is closed
Temporal blockage of floors takes place with the timers from the menu B615.