KW DAVID 613 Скачать руководство пользователя страница 17

Страница: 17 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613

DAVID-D613-V125-E 13.04.2021

Page - 17 -

Brake Monitoring Synchronization

The brake elements are monitored for synchronization. The default value for this tolerance time is

500ms.

1.5.4 Fault clearance and Reset

Depending on the number of connected brake circuits may appear in the event of an error of up to 4

errors. In the Menu C3 all error messages are marked present.

ERROR 51

Brake element monitor

There is no expected signal levels at the monitoring braking

inputs of the control DAVID-606/613/2005.

ERROR 54

Brake element synchronization

The monitoring of the braking elements has been activated.

One of the monitor inputs is out of order or it is slower than

the other(s) channel. Please check it.

After remedying the lack of the brake elements / or the external wiring, the drive can be

unlocked by

selecting the error menu C0 RESET memory

E506

E506 RESET Brake Element

Possibility of the external reset for brake monitoring elements

It is also possible to program a free entrance to the input function E506. By connecting a bowl button it

is possible to unlock the system via a pulse on this input.

Solely through the on / off of the controller, the control is not unlocked, i.e. if the error message F51 or

F54 is applied and the system shuts off and then switched on again, the control with the appropriate

error message locked.

Содержание DAVID 613









































































































































































































































































Результаты поиска

Содержание DAVID 613

Отзывы:

KW DAVID 613, Руководство по эксплуатации, Страница: 17 / 264

Результаты поиска

Содержание DAVID 613

Отзывы: