KW DAVID 613, Руководство по эксплуатации, Страница: 212 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 212 -
Submenu change direction value: NO / YES
Due to the importance of the counter, another request is implemented, setting a new value.
Submenu reset value
Based on the documentation of the rope manufacturer, the final value can be entered in rides.
Submenu warning threshold
In order to have the possibility to react, a pre-warning threshold can be established. It should be sized
so that the plant does not come to a standstill.
Menu D2 Rope wear counter
Submenu password
In order to make or change outputs on the rope wear counter, a password entry is necessary.
Submenu rope wear counter OFF / ON
Here the rope welding counter can be switched on or off.
Set the rope wear submenu value: NO / YES
Due to the importance of the counter, another request is implemented, setting a new value.
Submenu residual value
Based on the documentation of the rope manufacturer, the final value can be entered in journeys.
Submenu warning threshold
In order to have the possibility of reaction, a pre-warning threshold can be established. It should be
sized so that the plant does not come to a standstill.
D3 Run time counter
In the submenu D3 the hour meter is realized. Two hour meters are available:
Network hour meter
Operating-hours meter
Operating-hours meter erasable
Operating-hour meter clear?
Length hour erasable
Length hours clear?
Fault counter erasable
Fault counter clear?
Operation time
Delete operation time
Failure hour counter
Delete failure hour counter
Normal running time
Delete normal travel time
Special driving time
Delete special driving time
Rest time
Delete rest time
D4 Door motion counter
In the submenu D4 the door transaction counter is realized. Two door transaction counters are availa-
ble for 2 door sides:
Indicate the door movements door 1 Activity count, erasable
Indicate the door movements door 2 Activity count, erasable
Indicate the door movements door 3 Activity count, erasable
Delete door transaction counters Erasable, for the statisics evaluation
Indicate door maintenance Adjust the number of the door movements, starting from one
Message takes place. Range of adjustment from 100 to 100.000