KW DAVID 613 Скачать руководство пользователя страница 18

Страница: 18 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613

DAVID-D613-V125-E 13.04.2021

Page - 18 -

1.5.5 Function test – Self-Monitoring of the Braking Elements

after EN81-

1/2:1998+A3:2009

Generally

Due to the development of the software, the function of the brake elements in-plant monitoring at KW

Aufzugstechnik GmbH in the testing, as well as in the on-site commissioning of the lift system must be

examined. The description of the functional test is part of the manual.

Test cable break - Monitoring Input 1

1.)

Switch off the s

ignal line at the monitoring input channel 1.

2.)

Return Motion Drive UP or DOWN

3.)

The Controller DAVID 606/613/2005 gives the error mes-

sage

"F54 – Brake Element Synchronization” and locks.

More trips are not possible!

4.) Switch on the s

ignal line at the monitoring input channel 1.

5.)

With the Return-Drive to try to take a ride. A drive may be

not possible!

6.)

In the menu C0 the Controller DAVID 606/613/2005 can be

unlocked in the fault memory by selecting the error. The

elevator system is ready to start again.

Removing the monitoring channel 1

Test cable bridge - Monitoring Input 1

1.)

Switch off the s

ignal line at the monitoring input channel 1

and put in a jumper between terminal 200 (+24 V DC) and

channel 1.

2.)

Return Motion Drive UP or DOWN

3.)

The Controller DAVID 606/613/2005 gives the error

message "F51 – Brake Element Function” and locks.

More trips are not possible!

4.)

Put off the jumper between the terminal 200 and channel 1

Switch on the

Signal line at the monitoring input channel 1.

5.)

With the Return-Drive to try to take a ride. A drive may be

not possible!

6.)

In the menu C0 the Controller DAVID 606/613/2005 can be

unlocked in the fault memory by selecting the error. The

elevator system is ready to start again.

Setting the jumper between 20o and Chan-

nel 1

Repeat the test steps

After the two test steps were carried out for the monitoring braking element 1, then for all other brake

circuits have now equivalent to the test steps that are carried out!

Содержание DAVID 613









































































































































































































































































Результаты поиска

Содержание DAVID 613

Отзывы:

KW DAVID 613, Руководство по эксплуатации, Страница: 18 / 264

Результаты поиска

Содержание DAVID 613

Отзывы: