KW DAVID 613 Скачать руководство пользователя страница 131

Страница: 131 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613

DAVID-D613-V125-E 13.04.2021

Page - 131 -

B507- Floor Displays

In this menu are the names of the individual floors, registered by the first up to the 64th floor. There

are up to 3 points and the entire bandwidth of the ASCII character propositions for each stop are avail-

able.

The setting begins at the first stop with the two yellow editing keys. Right red button the three digits of

the display are to be approached, and then jumped on the next floor. This ends in the 64th floor. The

left red key (Escape), the process can be left and jumped back to the first floor.

This setting is binding on all bus displays, like the matrix LCD and TFT displays.

B507 Floor Displays-Menue

B507 floor display

Floor-01 display: -2

Esc Enter Value

For each floor an up to three-digit name can be entered.

B508- Messages

When KW adds protocol, up to 16 special messages can be transmitted serially. This menu can be set

for each message whether it is visualized in the display booth or on the floor indicator.

B508 Message-Menue

B508 Overload:

Car:* floor:-

Menue Value

This menu can be selected for

the cabin display and the floor in-

dicator, whether the special mes-

sage is displayed.

(* Display ON, - Display OFF)

Messages:

Overload

-> Evacuation

-> Fire Evacuation

-> Emergency Power Evac.

-> Fire Fighter Travel

-> Special Travel

-> Bed Travel

-> Guide Mode

-> Out Of Order

-> Maintenance

-> Loadingtime Active

-> Door Opening

-> Door Closing

-> Please Leave Car

-> Please Wait

-> Please Speak

B509- TFT/LCD - Car

This menu is made for the settings for the TFT-car indicator.

Background picture

In the "fixed" setting the background image for all floors is the same. "Switch" setting, each floor its

own wallpaper.

Persons in Car

Here, the number of persons for the labeling in the inner panel of the cabin is determined.

Loadweight

Here, the indication of the load on the labeling in the inner panel of the cabin is determined.

Text-1 Manufacture

Here, the indication of the manufacture for the labeling in the inner panel of the cabin is determined.

Содержание DAVID 613









































































































































































































































































Результаты поиска

Содержание DAVID 613

Отзывы:

KW DAVID 613, Руководство по эксплуатации, Страница: 131 / 264

Результаты поиска

Содержание DAVID 613

Отзывы: