KW DAVID 613, Руководство по эксплуатации, Страница: 161 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 161 -
B623 OSKAR INTERFACE
Safety related parts interface OSKAR was developed on the defaults of the FRAPORT AG for elevators
at airport Frankfurt/Main.
Interface supply four input functions and a connection to a LON-net.
PARAMETER OSKAR INTERFACE ON/OFF
Parameter to swich on and off the interface Oskar.
PARAMETER OSKAR CALL DEAD TIME
Parameter are adjustable for allowable time for call input.
B624 PARKING GARAGE
This parking garage funktion allows rationally enterprice for a parking garage of several lifts.
Filling enterprise or empty enterprice can assigned to indivudual lifts. The call algorithm is based on
FIFO principle.
PARAMETER PARKING GARAGE FUNCTION
By switching on the parking garage function the existing call algorith will be disabled.
Modes filling enterprise and empty enterprice are selecable about the entry functions E502 and E503.
1.) Filling Mode: active, if the input function E502 is active.
2.) Empty Mode: active, if the input function E503 is active
3.) Filling- and Empty Mode together, if E502+E503 are active
Parameter Filling Mode
The call on the door side-1 is the main access level triggered by landing call door side-1 on the ER. The
destination call is made by the driver on the keypad to input functions E334 ..E341.
Upon arrival of the car and then opened the door and break the light barrier car (E440.. E442) of the
dialed destination floor as a car call side of the door 2 is passed.
After completion of the auto-positioning (E442 active photocells, E440 + E441 is not active) the door will
be closed after a waiting time of 5 seconds, and start the ride.
At the end of the ride when the car left the cabin, is automatically started up again, the main access
level.
Parameter Empty Mode
If the call is on the door side-2 is given, is raised in the appropriate parking levels of the landing call door
side-2. The car moves to the appropriate floor and opens door-2.
If the car is positioned, the journey is automatically triggered in the exit floor (main entrance level). After
leaving the car the next landing call is served. The order of operation of the landing calls is determined
by a FIFO function, i.e. triggered the first landing call is served first.
Filling- and Empty Mode :
If empty and filling mode are enabled at the same time, the filling operation is carried out only if all the
empty mode runs were completed.
Funktion Special Drive :
If at least 5 seconds, there is no empty or filling mode request (no outside calls empty or filling opera-
tions, elevator waiting), then brought over the entrances outside preferred side of the door-1 (E250) or
door-2 (E251) for the elevator to the appropriate floor be. Subsequently, a car call can be performed.
During this process, the parking garage function empty or filling mode is disabled. At the end of the
voyage of the special parking operation is resumed.
625 TRAFFIC CAPTURE
The traffic capture function offer the energy-save-mode on an elevator.
Parameter Traffic capture function
In this parameter you can activate the traffic capture function.
Parameter Calm traffic ON after
If a traffic calming in elevator operation is detected, can be transferred in a traffic mode. The adjustable
tolerance-time is up to 60 minutes. The factory setting is 10 minutes.
Parameter Calm traffic OFF after
If an increased requirement for call detected in the calm traffic mode, the calm traffic mode is abandoned
and transferred to normal operation. In this parameter, the number of calls that serve as limit is adjust-
able.
Parameter Calm traffic slow drive
In response to the calm traffic time, a slower travel speed can be selected.
Parameter Calm traffic door slow
In response to the calm traffic time, a slower door speed can be selected.