manualshive.com logo in svg

horiba TPNA-500, Инструкция по эксплуатации

Поделиться
Скачать
horiba TPNA-500 Скачать руководство пользователя страница 6

For Your Safety

Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and follow the
instructions carefully.

Hazard classification

Warning symbols

This indicates an imminently hazardous situation which, if not avoided, will 
result in death or serious injury. This is to be limited to the most extreme 
situations.

This indicates a potentially hazardous situation which, if not avoided, could 
result in death or serious injury.

This indicates a potentially hazardous situation which, if not avoided, may 
result in minor or moderate injury. It may also be used to alert against 
unsafe practices.

Description of what should be done, or what should be followed

Description of what should never be done, or what is prohibited

Содержание TPNA-500






































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды