horiba TPNA-500, Инструкция по эксплуатации

Страница: 27 / 261

Connection
11
Connection
Signal wiring

External input/output
The input/output terminal connection diagram for this equipment is shown below.
The screw connection terminals inside the operation panel are used for the input/output
terminals.

Connect the signal lines according to the signal table.

Use a 2-core shielded cable for the current output signal line. Ground the shielded side to
the receiving side.

For noise protection, connect the surge absorber or noise killer in parallel with the contact
output signal lines.

Input/output terminal (standard: 1-point meter specification)

Input/output terminal (option: 3-component/2-point meter specification)
Contact
output
Power
Maintenance
Contact
output
Contact
output
Contact
output
Contact
input
Contact
input
Analog output
Analog input
(G)
(+)
(

)
(G)
(G)
(G)
(G)
(+)
(

)
(+)
(

)
(+)
(

)
(+)
(

)
(+)
(G)
(G)
(G)
(G)
(

)
(+)
(

)
(+)
(

)
(+)
(

)
(

)
(+)
(+)
(G)
(G)
(G)
(G)
(G)
Contact
output
Contact
output
Contact
input
Contact
input
Analog input
Analog output
(G)
(G)
(G)
(G)