horiba TPNA-500, Инструкция по эксплуатации

Страница: 29 / 261

Connection
13

Analog output
In this equipment, the measurement values are output via the analog current/voltage output
terminals.
There are four analog output lines as standard. For output, select the desired four
components from the following five.
The values are output in accordance with the specified full-scale value.

Measurement item

Standard specification

Only available for 3-component specification

Only available for 2-point meter specification
Measurement
item
Description
TP Conc. L1 Outputs the TP concentration for L1
TN Conc. L1 Outputs the TN concentration for L1
TP Load L1 Outputs the TP load for L1
TN Load L1 Outputs the TN load for L1
Flow L1 Outputs the L1 flow rate
No allocation -
Measurement item Description
COD Conc. L1 Outputs the COD concentration for L1
COD Conc-sec.L1
Outputs the COD instantaneous
concentration for L1
COD Load L1 Outputs the COD load for L1
Measurement item Description
TP Conc. L2 Outputs the TP concentration for L2
TN Conc. L2 Outputs the TN concentration for L2
TP Load L2 Outputs the TP load for L2
TN Load L2 Outputs the TN load for L2
Flow L2 Outputs the L2 flow rate
COD Conc. L2 Not used
COD Conc-sec.L2 Not used
COD Load L2 Not used