horiba TPNA-500, Инструкция по эксплуатации

Страница: 10 / 261

Product Handling Information
Operational precautions
Use of the product in a manner not specified by the manufacturer may impair the protection
provided by the product. And it may also reduce product performance.
Exercise the following precautions:

Only use the product including accessories for their intended purpose.

Use the equipment in an environment that does not contain corrosive gas.

Do not apply external shock or excessive vibration to the equipment. When relocating the
equipment, contact our service or sales office.

Do not switch the power ON and OFF immediately.

Do not operate the touch panel using the tip of your finger nail or a tool with a sharp edge,
or with wet hands.

Do not use solutions such as organic solvents.

Be extremely careful when handling chemicals.

A new reagent bottle is fully charged with reagent. If you grab the side of the bottle while
the cap is open, the reagent may spill out. When opening the cap of the reagent bottle for
setting or replacing the reagent, be careful not to spill the reagent. For example, place the
bottle on a flat surface.

Perform the installation work while taking the features of the analyzer into consideration.
Also, ensure an environment in which the equipment can operate normally. Take
appropriate action so that the equipment will not be damaged even when the equipment
no longer operates correctly due to deterioration or the operational setting conditions of
the equipment, or any unexpected phenomenon.
Disposal of the product
When disposing of the product, follow the related laws and/or regulations of your country.

The waste liquid of this equipment contains acid.

The mercury lamps in this product contains 18 mg of mercury.