horiba TPNA-500, Инструкция по эксплуатации

Страница: 18 / 261

Before Using the Product
2
Names of each part

Analyzer
1
5 6
2
4
[Models equipped with a pure water tank]
[When open]
3
Refer to page 3.
No. Name Description
1 Operation section Refer to “ Operation section” (page 5).
2
Electrical wiring service
entrance
A service entrance for electrical wiring.
3 Input/output terminal Power supply cable and signal lines are brought into the equipment here.
4
Main power switch
(Ground fault interrupter)
Turns ON/OFF the power to the equipment.
5 Waste liquid tank
The amount of waste liquid is approximately 17 L per month. Includes alarm output
contact terminals to activate a “Full Drain Tank” alarm when the tank reaches full capacity.
Tank capacity is 20 L. Check level in the tank and dispose of waste liquid as necessary.
6 Pure water tank
Storage capacity is approximately 20 L of pure water. Amount of pure water
consumed is approximately 40 L per month (depending on measurement range).
Includes alarm output contact terminals to activate a “Lack Blank” alarm when the
amount of pure water remaining is insufficient (not needed for units that use tap water
for the water supply or for units with built-in pure water unit).