horiba TPNA-500, Инструкция по эксплуатации

Страница: 106 / 261

Function
90

EXT. ANALOG OUTPUT SET
Specifies the analog output.
Operation procedure
1.
Press [EXT. ANALOG OUTPUT SET] in the OUTPUT SET screen.
The EXT. ANALOG OUTPUT screen will be displayed.
2. Specify the external analog output.
Reference
For the correspondence between the setting channel and terminal number, refer to “ Initial allocation
of analog output” (page 15).
Item Setting range Default value Description
Output Level
0 mA to 16 mA
4 mA to 20 mA
Outputs a signal within the range from 0
mA to 16 mA for the full scale of the
measurement range.
4 mA to 20 mA
Outputs a signal within the range from 4
mA to 20 mA for the full scale of the
measurement range.
Output Limit
100%
110

Outputs a signal up to the range of 100%
for the full scale of the measurement
range.
110%
Outputs a signal up to the range of 110%
for the full scale of the measurement
range.
Output Assign

No allocation

TP Conc. L1, L2

TP Load L1, L2

TN Conc. L1, L2

TN Load L1, L2

COD Conc. L1, L2

COD Load L1, L2

Flow L1, L2

COD Conc-sec.L1, L2

ch00: TP Conc. L1

ch01: TN Conc. L1

ch02: TP Load L1

ch03: TN Load L1
Specifies the output target.
Output F.S 0.01 to 9999999

00: TP Conc. L1 full scale

01: TN Conc. L1 full scale

02: TP Load L1 1000 kg/h

03: TN Load L1 1000 kg/h
Specifies the full scale for the output
target.
Note: L2 can be selected only for the two-point meter specification.
MEAS. MENU SETTING OUTPUT SET
[MENU]
[OUTPUT SET]
[SETTING]
Refer to “ To display the [MENU] item screen” (page 62).